4-Rib Aluminum Duct
A general-purpose semi-rigid duct for extract and supply runs. A 3 m length compresses to about 80 cm.
DUCTS / ALUMINUM
At our factory in Ningbo, China, we form semi-rigid ducts from 8011-O aluminum strip. They bend by hand and hold their shape. Choose from 4-rib, 7-rib, 9-rib and fully corrugated profiles, or request a rectangular section.

Products
Standard length is 3 m, with custom lengths from 0.5 m to 6 m. Compressed length depends on the profile: about 60 cm for full-corrugation, 75 cm for 9-rib and 90 cm for 7-rib.
A general-purpose semi-rigid duct for extract and supply runs. A 3 m length compresses to about 80 cm.
Tighter corrugation for flexible routing, with a stainless steel option on the same profile.
A denser profile for longer runs, with double-layer construction available.
The most flexible profile for tight bends and short connections, compressed to about 60 cm.
A rigid rectangular section for linear slots and compact duct runs, made to your size.
Dimensions and constructions are catalog references. Confirm the final specification, packing and destination with our team before ordering.
Specifications
Catalog data. Confirm the profile, diameter, wall thickness and packing for your order.
| Profile | Diameter | Strip width | Thickness | Compressed from 3 m | Standard length |
|---|---|---|---|---|---|
| 4-rib | 80–350 mm | 60 mm | 0.08–0.15 mm | Approx. 80 cm | 3 m |
| 7-rib | 75–350 mm | 60 mm | 0.06–0.15 mm | Approx. 90 cm (aluminum) | 3 m |
| 7-rib small | 40–100 mm | 45 mm | 0.06–0.15 mm | Approx. 90 cm (aluminum) | 3 m |
| 9-rib | 100–500 mm | 80 mm | 0.08–0.15 mm | Approx. 75 cm | 3 m |
| Full corrugation | 100–500 mm | 80 mm | 0.08–0.12 mm | Approx. 60 cm | 3 m |
| Rectangular | on request | — | on request | — | on request |
Models
Factory model numbers next to the codes our customers use for the same item. Quote either one.
| WIND model | Diameter | Profile · thickness · length | Customer code |
|---|---|---|---|
S7A08042300 | 42 mm | — | — |
SXA08042300 | 42 mm | 7-rib (small) · 0.08 | — |
S7A08062013 | 62 mm | 7-rib (small) · 0.08 · 1.3 | — |
S7A08062130 | 62 mm | — | — |
SXA08062130 | 62 mm | 7-rib (small) · 0.08 | — |
S7A08064300 | 64 mm | — | — |
S9A10064300 | 64 mm | — | — |
SXA08064300 | 64 mm | 7-rib (small) · 0.08 | — |
SFA10075300 | 75 mm | Full corrugation · 0.1 · 3 | SRD3075B-M10 |
S9A08076300 | 76 mm | 9-rib · 0.08 · 3 | 7SFD0310 |
S9A10076300 | 76 mm | 9-rib · 0.1 · 3 | — |
SFA10076300 | 76 mm | — | — |
S9A08100300 | 100 mm | 9-rib · 0.08 · 3 | — |
S4A10102100 | 102 mm | 4-rib · 0.1 | — |
S4A10102200 | 102 mm | — | — |
S7A08102042 | 102 mm | — | — |
S7A08102245 | 102 mm | 7-rib · 0.08 | — |
S9A08102050 | 102 mm | — | — |
S9A08102245 | 102 mm | 9-rib · 0.08 · 2.45 | — |
S9A08102300 | 102 mm | 9-rib · 0.08 · 3 | 7SFD0410 |
S9A10102300 | 102 mm | 9-rib · 0.1 · 3 | — |
S9A10102600 | 102 mm | — | — |
SFA08102240 | 102 mm | Full corrugation · 0.08 · 2.4 | — |
SFA10102200 | 102 mm | — | 34618 |
SFA10102300 | 102 mm | Full corrugation · 0.1 · 3 | SRD3100B-M10 / SRD3100 |
SFA10102500 | 102 mm | — | — |
S7A15103400 | 103 mm | 7-rib · 0.15 | — |
S9A08112300 | 112 mm | 9-rib · 0.08 | — |
S9A10112300 | 112 mm | 9-rib · 0.1 | — |
SFA10112500 | 112 mm | Full corrugation · 0.1 | — |
S4A10127100 | 127 mm | 4-rib · 0.1 | — |
S4A10127200 | 127 mm | — | — |
S9A08127300 | 127 mm | 9-rib · 0.08 | — |
S9A10127300 | 127 mm | 9-rib · 0.1 · 3 | — |
SFA08127240 | 127 mm | Full corrugation · 0.08 · 2.4 | — |
SFA10127300 | 127 mm | Full corrugation · 0.1 · 3 | SRD125-3 / SRD3125B-M10 / SRD3125 / P-SRD125-3 |
SFA10127300-PJ | 127 mm | — | — |
SFA10127500 | 127 mm | — | — |
S9A10142300 | 142 mm | 9-rib · 0.1 | — |
SFA10142200 | 142 mm | Full corrugation · 0.1 | 34620 |
Showing 40 of 75 models. See every model and customer code.
Drawing
A/B/C are shown on the two drawings; the values are in the table. The drawings are schematic and not to scale.
Click a drawing to open it full size. The table below carries the values.
| Code | Meaning | Standard options |
|---|---|---|
| A | Diameter | 4-rib 80–350 · 7-rib 75–350 · 9-rib / full 100–500 mm |
| B | Extended length | 3 m standard; 0.5–6 m custom |
| C | Compressed length | For a 3 m aluminum duct: full corrugation approx. 60 cm; 7-rib approx. 90 cm. |
A/B/C apply to both profiles. The 7-rib drawing shows the rib band for clarity; production is continuous corrugation.
Options
Sizes, materials and packing can be adapted to your project. Tell us where the product is installed and how it ships.
Ningbo factory · custom buildFAQ
If your question is not here, send it with your drawing or specification.
Further reading
The rib profile guide explains what 4-, 7- and 9-rib profiles change in practice, price drivers shows what moves the quotation, and MOQ and lead time covers how a first order is planned.
Next step